47-1,Lane 199,Renxin Rd.,Renwu,Kaohsiung City 814,Taiwan
T:886-7-375-6058 .   F:+886-7-375-6091

High Load Chemical anchor

Description
 
It is solvent-free and epoxy based 2-part high performance anchoring adhesive. It is used for fixing of non-expanding anchors.
Usage
 

For the fixing of non-expanding anchors in the following:
*For structural work:

 

        1.Rebar / steel reinforcement anchoring in new and refurbishment works.
        2.Threaded rods
        3.Bolts and special fastening systems

* Mechanical and electrical services installation:


        1.Anchoring of supports for ducting and equipment.


*Metal Work, carpentry

       1.Fixing of handrails, balustrades and supports
       2.Fixing of railings
       3.Fixing of window and door frames

Where to Use
How to Use
 

1.DRILL
Drill hole to the diameter and depth required. The diameter must be in accordance with anchor size.
2.CLEAN
The drill hole must be cleaned with air blower, starting from the bottom of the hole.
The drill hole must be thoroughly cleaned with steel brush. After brush, to use air blower to clean the drill hole again.
3.INJECT
Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer.

In any case avoid entrapping air. For deep holes extension tubing can be used.
4.INSERT
Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole.
5.ANCHOR
During the resin hardening time the anchor must not be moved or loaded.

Technical Data
Product Series
E280.jpg

FX-E280

E400_工作區域 1.png

FX-E400

WE400.jpg

FX-WE400

QE650.jpg

FX-QE650

E360.jpg

FX-E360

EP5.png

FX-EP5

QE400_1.jpg

FX-QE400