top of page

Wear Resistant Epoxy Putty


It is a ceramic-filled and low-friction finish epoxy putty and it cures at room temperature and is designed for maintenance, repair and tooling applications, and also can be be drilled, tapped, machined or painted.

  • Repair areas where welding or brazing would be undesirable or impossible.

  • Repair of very weak metals.

  • Iron repair and molding.

  • Rebuilding pump and valve bodies, flange faces, machine ways, valve seats and bodies, and tracing guides.

Where to Use


  • Easily applies to upright surfaces.

  • Fix to aluminum, steel and many other metals, wood, as well as concrete.

  • Machine casting to metallic finish.

  • 100% solids.

  • Non-rusting repairs.

  • Resistant to chemicals and most acids, bases, solvents and alkalis.

  • High performance of wear resistance.

  • Rebuilds and protects interfacing metal surfaces.

  • Protects metal from bi-metallic corrosion.

How to Use


FX-WRE110 Wear resistant epoxy putty only be applied to clean, dry and well roughened surfaces.
(1) Remove all loose material and surface contamination and clean with a suitable solvent which leaves no residue on the
surface after evaporation such as acetone, MEK, isopropyl alcohol, etc.

(2) If necessary, apply moderate heat to remove ingrained oil and clean again with solvent.

(3) Roughen surface by abrasive blasting, grinding, rotary file or other appropriate means.


Using an appropriate tool, apply the mixed epoxy putty to the prepared surface, pressing firmly to insure intimate contact and eliminate any air pockets at the bond line or within the material.
Some applications such as holed pipes or tanks and cracked casings may require the use of reinforcement tape to bridge the damaged area(s) followed by the application of additional material to completely cover the reinforcement tape.


Wipe excess material from tools immediately. Use acetone, MEK, isopropyl alcohol or similar solvent as needed.

Technical Data
SGS Test Report(EN)_Wear resistant epoxy putty_FX-WRE 110_230116.jpg
Product Series
Repair epoxy putty series product_comparison table


bottom of page